Commercial festoon lighting systems for contractors, venues and distributors. E27/B22, 24V/230V and OEM/ODM options for UK, EU and Australia projects.
A 24V E27 bulb must be specified as part of a complete lighting system. Confirm the exact bulb model and the connected power supply, cable and sockets before ordering.
This article concerns 24V bulbs. Use a compatible 24V power supply and confirm bulb wattage, total connected load and any driver requirements from the current model documents. Do not connect a 24V bulb directly to mains voltage.
Verify the E27 holder, bulb dimensions and available clearance in the intended fitting. Confirm that the socket and cable are suitable for the installation environment.
Ask for the exact model’s IP test documentation. A bulb, socket, connector and transformer may have different ratings; the lowest relevant rating and the way components are assembled matter for the installed system. Do not infer marine or sub-zero performance from a generic “waterproof” label.
Before design approval, request the model number, electrical specification, photometric information where needed, applicable test documents, installation instructions and agreed warranty terms. WENDADECO can help match a 24V E27 bulb to a compatible commercial outdoor lighting system.
B22 compatibility: Use a 24V bulb only with a compatible B22 lampholder and a driver with the matching output. Check the AC/DC requirement, wattage, bulb dimensions and clearance in the model documents. Never connect a 24V bulb directly to mains.
IP: LED bulbs are generally IP44 unless a model-specific report states otherwise. A bulb rating applies only to that tested bulb model and does not establish the rating of the socket, connector or complete string. Test reports available per model on request.
Quality: For the selected order, request the inspection plan and record showing which voltage, power, function and visual checks are performed and whether inspection covers samples, the batch or every unit. Do not assume 100% testing without order-specific evidence. Confirm housing material, light output and replacement availability against the agreed specification.